Time: 16:13:29 CET 07:13:29 PST 10:13:29 EST 23:13:29 Seoul 22:13:29 Beijing
TOPIC
« Previous1Next »
mouse hertz Windows 7
hi,
how I can change the amount of hertz on my mouse in Windows 7 ?
how I can change the amount of hertz on my mouse in Windows 7 ?
rom2k wrote:
hi,how I can change the amount of hertz on my mouse in Windows 7 ?
afaik default usb hz is 500 in windows 7. but i don't think there's any way changing it yet
are u sure ?
i'm in 125hz by default
By the way is there yet a way to disable mouse accel in windows 7 without driver software? I had windows 7 some months ago and i loved it but there was no other way to disable accel back then. Another thing why i could'nt use 7 was that 5h v2 has pretty bad bass level for listening to music and i couldn't find a win7 compatible software for my realtek HD.
did u try all mousefixes and stuff?
Flark wrote:
http://www.ngohq.com/news/15043-how-increase-usb-sample-rate-windows-vista-sp1.htmlworks 100%
yes IT WORKS !
but add this line
1. Download Driver Signature Enforcement Overrider (attached below as dseo13b.exe).
2. Download HIDUSBF (attached below as hidusbf.zip).
3. Run Driver Signature Enforcement Overrider and choose Enable Test Mode.
RESTART COMPUTER
4. Extract HIDUSBF to some folder, right click on HIDUSBF.inf and choose Install.
5. Run Setup.exe from HIDUSBF’s folder, check the Filter on Device box and select your desired sample rate.
6. Run Driver Signature Enforcement Overrider again, choose Sign a System file and insert full path to the installed HIDUSBF.sys file (For example: C:\Windows\System32\Drivers\HIDUSBF.sys).
7. Restart your computer and enjoy.
8. Verify by using Mouse Rate or DirectInput Mouse Rate (attached below as mouserate.exe and dimr.exe)
9. If you would like to remove the test mode watermark, run Driver Signature Enforcement Overrider and choose Watermark removal.
and it works ;)
thanks a lot for this link guy ;)
rom2k wrote:
Flark wrote:
http://www.ngohq.com/news/15043-how-increase-usb-sample-rate-windows-vista-sp1.htmlworks 100%
yes IT WORKS !
but add this line
1. Download Driver Signature Enforcement Overrider (attached below as dseo13b.exe).
2. Download HIDUSBF (attached below as hidusbf.zip).
3. Run Driver Signature Enforcement Overrider and choose Enable Test Mode.
RESTART COMPUTER
4. Extract HIDUSBF to some folder, right click on HIDUSBF.inf and choose Install.
5. Run Setup.exe from HIDUSBF’s folder, check the Filter on Device box and select your desired sample rate.
6. Run Driver Signature Enforcement Overrider again, choose Sign a System file and insert full path to the installed HIDUSBF.sys file (For example: C:\Windows\System32\Drivers\HIDUSBF.sys).
7. Restart your computer and enjoy.
8. Verify by using Mouse Rate or DirectInput Mouse Rate (attached below as mouserate.exe and dimr.exe)
9. If you would like to remove the test mode watermark, run Driver Signature Enforcement Overrider and choose Watermark removal.
and it works ;)
thanks a lot for this link guy ;)
doesent work to me :S??
retry....:s
rom2k wrote:
Flark wrote:
http://www.ngohq.com/news/15043-how-increase-usb-sample-rate-windows-vista-sp1.htmlworks 100%
yes IT WORKS !
but add this line
1. Download Driver Signature Enforcement Overrider (attached below as dseo13b.exe).
2. Download HIDUSBF (attached below as hidusbf.zip).
3. Run Driver Signature Enforcement Overrider and choose Enable Test Mode.
RESTART COMPUTER
4. Extract HIDUSBF to some folder, right click on HIDUSBF.inf and choose Install.
5. Run Setup.exe from HIDUSBF’s folder, check the Filter on Device box and select your desired sample rate.
6. Run Driver Signature Enforcement Overrider again, choose Sign a System file and insert full path to the installed HIDUSBF.sys file (For example: C:\Windows\System32\Drivers\HIDUSBF.sys).
7. Restart your computer and enjoy.
8. Verify by using Mouse Rate or DirectInput Mouse Rate (attached below as mouserate.exe and dimr.exe)
9. If you would like to remove the test mode watermark, run Driver Signature Enforcement Overrider and choose Watermark removal.
and it works ;)
thanks a lot for this link guy ;)
thanks dude! This work. Thanks so much!
after i did what you told me to. my mouse stopped working with the following usb port so i changed the port and tested the usb rate.. still having 125hz -.-
yeah i tried that stuff and it kills the whole port.. its maybe because i have a late windows 7 patch
i did the whole shit again 'n' worked whipeykaiyeymutafuka =)
Jippy wrote:
rom2k wrote:
Flark wrote:
http://www.ngohq.com/news/15043-how-increase-usb-sample-rate-windows-vista-sp1.htmlworks 100%
yes IT WORKS !
but add this line
1. Download Driver Signature Enforcement Overrider (attached below as dseo13b.exe).
2. Download HIDUSBF (attached below as hidusbf.zip).
3. Run Driver Signature Enforcement Overrider and choose Enable Test Mode.
RESTART COMPUTER
4. Extract HIDUSBF to some folder, right click on HIDUSBF.inf and choose Install.
5. Run Setup.exe from HIDUSBF’s folder, check the Filter on Device box and select your desired sample rate.
6. Run Driver Signature Enforcement Overrider again, choose Sign a System file and insert full path to the installed HIDUSBF.sys file (For example: C:\Windows\System32\Drivers\HIDUSBF.sys).
7. Restart your computer and enjoy.
8. Verify by using Mouse Rate or DirectInput Mouse Rate (attached below as mouserate.exe and dimr.exe)
9. If you would like to remove the test mode watermark, run Driver Signature Enforcement Overrider and choose Watermark removal.
and it works ;)
thanks a lot for this link guy ;)
thanks dude! This work. Thanks so much!
how does this work for u guys ? i tried and my mouse is just dead even tho its lighting up.
Apocalipsy wrote:
mw wrote:
rom2k wrote:
hi,how I can change the amount of hertz on my mouse in Windows 7 ?
afaik default usb hz is 500 in windows 7. but i don't think there's any way changing it yet
nope default is 125hz atleast on my enterprise 64bit enterprise is the same as ultimate.
tpo wrote:
Apocalipsy wrote:
mw wrote:
rom2k wrote:
hi,how I can change the amount of hertz on my mouse in Windows 7 ?
afaik default usb hz is 500 in windows 7. but i don't think there's any way changing it yet
nope default is 125hz atleast on my enterprise 64bit enterprise is the same as ultimate.
most mouses are 125 hz... wish there was a way to make it 500hz
rom2k wrote:
hi,how I can change the amount of hertz on my mouse in Windows 7 ?
apparently u dont know the troubles of installing it on windows 7 or vista
drivers
rom2k wrote:
Flark wrote:
http://www.ngohq.com/news/15043-how-increase-usb-sample-rate-windows-vista-sp1.htmlworks 100%
yes IT WORKS !
but add this line
1. Download Driver Signature Enforcement Overrider (attached below as dseo13b.exe).
2. Download HIDUSBF (attached below as hidusbf.zip).
3. Run Driver Signature Enforcement Overrider and choose Enable Test Mode.
RESTART COMPUTER
4. Extract HIDUSBF to some folder, right click on HIDUSBF.inf and choose Install.
5. Run Setup.exe from HIDUSBF’s folder, check the Filter on Device box and select your desired sample rate.
6. Run Driver Signature Enforcement Overrider again, choose Sign a System file and insert full path to the installed HIDUSBF.sys file (For example: C:\Windows\System32\Drivers\HIDUSBF.sys).
7. Restart your computer and enjoy.
8. Verify by using Mouse Rate or DirectInput Mouse Rate (attached below as mouserate.exe and dimr.exe)
9. If you would like to remove the test mode watermark, run Driver Signature Enforcement Overrider and choose Watermark removal.
and it works ;)
thanks a lot for this link guy ;)
This works on microsoft 3.0? how mutch hertz can i use? pls help seriously, my 3.0 in cs 1.6 is kinda laggy o.O
rom2k wrote:
Flark wrote:
http://www.ngohq.com/news/15043-how-increase-usb-sample-rate-windows-vista-sp1.htmlworks 100%
yes IT WORKS !
but add this line
1. Download Driver Signature Enforcement Overrider (attached below as dseo13b.exe).
2. Download HIDUSBF (attached below as hidusbf.zip).
3. Run Driver Signature Enforcement Overrider and choose Enable Test Mode.
RESTART COMPUTER
4. Extract HIDUSBF to some folder, right click on HIDUSBF.inf and choose Install.
5. Run Setup.exe from HIDUSBF’s folder, check the Filter on Device box and select your desired sample rate.
6. Run Driver Signature Enforcement Overrider again, choose Sign a System file and insert full path to the installed HIDUSBF.sys file (For example: C:\Windows\System32\Drivers\HIDUSBF.sys).
7. Restart your computer and enjoy.
8. Verify by using Mouse Rate or DirectInput Mouse Rate (attached below as mouserate.exe and dimr.exe)
9. If you would like to remove the test mode watermark, run Driver Signature Enforcement Overrider and choose Watermark removal.
and it works ;)
thanks a lot for this link guy ;)
when i try this my mouse dead!!! this shit dont work
wheLLseN wrote:
pgz wrote:
rom2k wrote:
Flark wrote:
http://www.ngohq.com/news/15043-how-increase-usb-sample-rate-windows-vista-sp1.htmlworks 100%
yes IT WORKS !
but add this line
1. Download Driver Signature Enforcement Overrider (attached below as dseo13b.exe).
2. Download HIDUSBF (attached below as hidusbf.zip).
3. Run Driver Signature Enforcement Overrider and choose Enable Test Mode.
RESTART COMPUTER
4. Extract HIDUSBF to some folder, right click on HIDUSBF.inf and choose Install.
5. Run Setup.exe from HIDUSBF’s folder, check the Filter on Device box and select your desired sample rate.
6. Run Driver Signature Enforcement Overrider again, choose Sign a System file and insert full path to the installed HIDUSBF.sys file (For example: C:\Windows\System32\Drivers\HIDUSBF.sys).
7. Restart your computer and enjoy.
8. Verify by using Mouse Rate or DirectInput Mouse Rate (attached below as mouserate.exe and dimr.exe)
9. If you would like to remove the test mode watermark, run Driver Signature Enforcement Overrider and choose Watermark removal.
and it works ;)
thanks a lot for this link guy ;)
when i try this my mouse dead!!! this shit dont work
your mouse is on usb?^_^
ofc on USB
virus lolol?
« Previous1Next »
