I've played with an old nvidia graphic card since i can remember :P and allways used 1.31 gamma. Now i got a new card, downloaded the latest drivers for it but nvidia made a new control panel and gamma is now measured in % u_U
Is there any way to get the old panel so i can set my gamma to 1.31 or how much % should i use?

oops typo in title xD

bump @_@ i also dont know how to get those black bars at the sides to convert the widesceren into 4:3 T_T help?

there is the option that you can switch to the classic-view-pannel

try to look for it i'm serious !

i had that on the latest drivers of my old card, but on these it says "all of nvidia control panels have been consolidated into a single aplication, the NVIDIA Control Panel" and the option for the classic one is not there anymore T_T thx anyways

let's give this a bump :P

:( bump

If you want your old driver settings for gamma it would be 1.13 = (63%) and 1.31 = (81%).

The values below are the values that i have always used for old and new.

Brightness: 103% (old) = 53% (new)
Digital Vibrance: first notch = 1% "I AM NOT SURE ABOUT THE OTHER NOTCHES SO REPLY BACK IF YOU NEED THEM"
Gamma: 1.13 = 63%

ALSO- I used the registry file in this website to convert back to the old control panel http://www.laptopvideo2go.com/forum/index.php?showtopic=11627 . This is how I figured these values out. USE REG FILES AT OWN RISK.

Sorry for the Double post but I figured out the digital vibrance conversion from old to new control panel. From what I am seeing right now first notch = 1% , second notch = 31% , third notch = 65% , and forth notch = 98%